Can You Change Your Lutron Dealer? How It Works by System
RadioRA 3, HomeWorks and RadioRA 2 systems are programmed in Lutron's dealer software, so when a keypad, a scene or a shade needs changing, Lutron's customer service may point the owner to the dealer it has on record for that house. That can make the system feel tied to one company. It isn't. Lutron's own instructions for dealers cover taking over a job another dealer installed, and on its newest systems access is shared from the owner's own app. How a move works depends on which system is in the house. Everything below is from Lutron's support articles and application notes.

First: which Lutron system is it?
The model number on the processor's label answers it. RR-PROC3 is RadioRA 3, HQP7 is HomeWorks QSX, HQP6 is HomeWorks QS, and RR-MAIN-REP is a RadioRA 2 main repeater. The older HomeWorks Illumination processors are H8P5, H4P5 and HRP5. Lutron Customer Assistance (1.844.LUTRON1) is another place to ask. Not sure which brand of system it is at all? Which System Do You Have? starts there.
| System | How a new dealer gets to the programming |
|---|---|
| RadioRA 3, HomeWorks QSX | Access is shared from the Lutron app, or a dealer proves physical access to the processor |
| HomeWorks QS, RadioRA 2 | Read back from the processor or main repeater over the house network |
| HomeWorks Illumination | Extracted from the processor over Ethernet or RS-232 (Lutron Application Note #829) |
| Caséta | No dealer software involved; set up in the Lutron app |
RadioRA 3 and HomeWorks QSX: access is shared
These two systems are attached to what Lutron calls a Place, and access to it is shared through Lutron's apps and its Designer software. Lutron's support article on managing and sharing that access (000002935) is written for dealers, including "when you are taking over a job," and it is plain about the order to try things in.
1. The owner shares access from the app
In the Lutron app, the owner taps Remote Assistance from Installer, under Settings, then Help, and shares the system with the new dealer's myLutron email address. Lutron tells dealers this is the route to take: "claiming a system using a homeowner account should be a last resort, instead you should be attempting to get share access to your pro account from the existing homeowner, or from another Pro with access already." Its reason is the one that matters to the owner: building a new Lutron Designer project from scratch "is time-consuming for the dealer and costly for the homeowner."
2. If nobody in the house has the app account
A myLutron Professional can get access on their own "if physical access to a processor can be proven." In the Lutron app's Pro Installer mode they choose RadioRA 3 / HomeWorks, then "my system is not on the list," then Access Place via Local Network, and discover a processor on the home's network. Lutron's requirements: RadioRA 3 or HomeWorks QSX only, processor firmware 26.0 or later, Lutron app 26.2.3 or later, a processor that is online, activated and associated with a Place, and Remote Services turned on for that Place. It gives the dealer permanent administrator access, and the system's owners receive an email that the Place was shared.
3. If neither works
Lutron's article tells a dealer with no path to the owner to email SystemSupport@Lutron.com with a description of the problem and "a clear photo of the MAC address on the label of the processor." In Lutron's words: "We typically respond within 24 hours with next steps."
The previous dealer's access
Lutron's Manage Access screen lists everyone who has access to the system and how long that access lasts, and a dealer with administrator access can revoke other users there. Lutron does not describe an owner-side button for removing a dealer, so ask the new dealer to do it once they are in, or ask Lutron Tech Support. Owner accounts are different: "Only the Homeowner themselves, or Lutron Tech Support, can remove a homeowner account" from a Place.
HomeWorks QS and RadioRA 2: the programming is read from the system
These earlier systems have no Place in Lutron's cloud. The programming lives in the HomeWorks QS processor or the RadioRA 2 main repeater, and a dealer with Lutron's software for that system connects to it on the home's network and reads the project back. That makes the network the first thing a new dealer needs, in person or remotely. It is also why the first job on a system somebody else programmed is a backup: on HomeWorks QS we read the programming out twice and check both copies against the system before changing anything.
Lutron releases its programming software to dealers who complete its training, so the work itself goes through a dealer. Can You Install and Program Lutron RA3 Yourself? covers what an owner can and can't do alone.
HomeWorks Illumination: the older HomeWorks
Lutron's Application Note #829 (Revision A, January 2024) is the procedure for "extracting an existing project file" from a HomeWorks Illumination P5 processor, the 8 Series, 4 Series and the HRP5. It lists three ways: the Illumination software over the network, the Illumination software over RS-232, and the HomeWorks Extraction Utility over RS-232. The serial methods need a cable at the processor. Lutron adds: "If the extracted file doesn't meet the integrity check, trying a different method may yield better results."
Caséta
Caséta has no dealer software and no dealer account to move. It is set up in the Lutron app, so whoever holds the app account holds the system. Caséta vs Caséta Pro covers the two bridges.
Shades
A shade that stops short of fully closed is often a limit setting. On Caséta and RA2 Select, limits can be set from the Lutron app; on RadioRA 3 and HomeWorks they are set at the shade's drive or by whoever programs the system. Lutron Sivoia QS Shades: Control, Integration and Fixes has the details.
What to have ready before calling another dealer
- The system and the processor's model number, and for RadioRA 3 or HomeWorks QSX a clear photo of the processor's label with its MAC address.
- Whether anyone in the house has the Lutron app account, and which email it uses.
- The previous dealer's name and contact details. Lutron lists "the original installer's contact information" among the things that help a takeover.
- What needs changing, one line per item: the shade that stops short, the button that does the wrong thing, the schedule that runs at the wrong hour.
- Any project file, printout or paperwork the original installer left.
If the dealer has closed rather than just stopped being the right fit, Lutron dealer out of business? is the page for that. If no dealer near the house will take it on, text (734) 231-1940 or email support@ixome.ai and we answer in writing.
Sources
- Lutron: Managing and Sharing Cloud Access (support article 000002935)
- Lutron: Application Note #829, HomeWorks Illumination Extraction Procedure (Revision A, January 2024)
