Apple TV Drivers for Control4: Which One, and What It Needs
An Apple TV is one of the most common sources in a Control4 house, and the choice of driver for it is wider than it was. Two drivers for systems on Control4 OS 4.0 or later came in front of owners in October 2026: Chowmain's, released on October 26, and DTI Automation's, sold through DriverCentral. Both talk to the Apple TV directly over the network and tell Control4 what it is doing. Here is every Apple TV driver for Control4 we could find, what each one needs, and what to think about before changing from the one you have. Everything below comes from each maker's own documents, read on October 30, 2026; DTI's listing was read again on November 16, 2026.

The drivers at a glance
| Driver | How it reaches the Apple TV | Control4 OS | Apple TV |
|---|---|---|---|
| Control4 (Apple TV + Apple Bridge drivers) | Through Apple Home, switched on from the owner's own iPhone or iPad in the Control4 app | 2.10.6 or later (2021 guide) | 4th generation or newer, tvOS 12.1 or later |
| Intrinsic Dev, Apple TV 4K | Directly over the network, through an interface Apple has not officially released | not stated on its page | 4th generation, 4K (5th and 6th generation); tvOS 16, 17, 18, 26 and 27 |
| DTI Automation, Apple TV | Directly over the network, running on the controller; no bridge or helper software | 4.0.0 or later | Apple TV 4K, tvOS 16 to 26 listed |
| Chowmain, Apple TV | Directly over the network, using Apple's own remote protocols; no bridge, extra hardware or cloud service | 4.0 or later (HC-series controllers not supported) | Apple TV 4K (all generations) and Apple TV HD, tvOS 16 or later |
The licences are priced by the makers. DTI's listing shows an MSRP of $100. Chowmain's shows US$90 MSRP, with a 90-day trial.
Control4's own driver
Control4's quick-start guide (revision C, April 2021) sets it up through Apple Home. The project gets one Apple TV driver per Apple TV and one Apple Bridge driver. The integration is then switched on in the Control4 app, under Apple TV Control, and the guide is firm that this has to happen on "the customer's device (logged into the customer's Apple ID)." It also asks for AirPlay to be on and for the Apple TV to be set never to sleep. When it works, the driver shows "Remote Activated."
The practical point: because the last step runs on the owner's own phone or tablet, even a remote setup needs a few minutes of the owner's help.
What the two new drivers add
Feedback. Chowmain's driver reports power and display state (asleep, screensaver, Home screen or an app), play, pause and stop, the app on screen, and the title with artwork. It does this even when someone uses the Siri Remote, an iPhone or AirPlay rather than Control4. That feedback is what lets programming react: the lights dim when a film starts and come back up when it's paused, or the room turns on when someone picks up the Siri Remote. Chowmain calls the last one Auto Room On, and there is an Auto Room Off to match.
Two details from its guide matter at setup. The Companion pairing is required. AirPlay pairing is optional, but without it there are no titles, artwork, play state or current app. The driver runs locally and uses the internet only for licensing, app icons and the catalogue search on the touchscreen pages.
The screens. Chowmain adds its own pages on T4 and T5 touchscreens and in the Control4 app: a full remote, every installed app, Apple TV user profiles, and a search that types onto the Apple TV. Control4 mini apps work on 50 App Switcher inputs, and an included Custom App driver can open any installed app, or a deep link to a show or channel inside one.
DTI's driver lists discovery on the network, reconnecting when the Apple TV's address changes, full remote and transport control, 25 app tiles, deep links into YouTube, Prime Video, Netflix and Hotstar, and a Search tab in the Control4 interface. For programming it has Play, Pause and Stop events and a screen-state variable (for example "App In Use" and "Went To Sleep"). Its listing doesn't describe now-playing titles. It is open about its limits, too: it notes that some Apple TVs on tvOS 26.6 stop responding while still on the network, and since its version 1104 the driver reconnects within about 16 seconds when that happens. The newest versions on its listing, 1116 and 1117, fix connections that dropped about a second after pairing on some Apple TVs and skip unreadable Apple TV messages instead of dropping the connection.
Limits worth knowing
- Siri voice. Chowmain's guide says plainly that Control4 can't pass voice to Siri. Its workaround is dictation with the phone keyboard's microphone on the Search page, typed into the Apple TV's search.
- Mute. The Apple TV itself has no mute, so Chowmain's pages send mute and volume to the room's receiver, amplifier or TV.
- An official Apple interface. Intrinsic's page says its driver uses an interface Apple has not officially released, and that the only official Apple TV integration is through HomeKit. Chowmain is straightforward about what that means, in the thread announcing its driver: Apple updates have broken integrations on many control systems before, including Control4's own driver, so it built in automatic driver updates and an optional IR fallback to keep basic control if one does.
What your system needs
- Control4 OS 4.0 or later for either new driver. Chowmain's guide adds that HC-series controllers aren't supported. A system on OS 3 climbs to 3.4.3 first, then to 4.0.0 and up. Which Control4 controllers can be upgraded lists each model's ceiling, and the upgrade is $129, done remotely.
- The Apple TV has to allow it. In Settings, AirPlay and Apple Home, Allow Access must be "Anyone on the Same Network" or "Everyone." Chowmain's driver can't pair while it's set to "Only People Sharing This Home."
- Ethernet if possible. Both new drivers say Wake On LAN works only over Ethernet. On Wi-Fi, Chowmain recommends setting Sleep After to Never. Chowmain also recommends a fixed address for the Apple TV (a DHCP reservation), though both drivers follow the Apple TV to a new one.
- A dealer to add it. Drivers go into the project with Composer Pro, the dealer software, and Chowmain sells its drivers only to authorized dealers. Both makers offer a trial that runs the driver in full.
Changing from the driver you have
Switching is not a swap of one file for another. Chowmain's own answer to "can I keep my programming?" is no: the events, commands and connections are different, so the programming is recreated, the mini apps are bound again, and the Apple TV is paired again. Every button, scene and schedule that mentions the old driver has to be rebuilt.
So take a backup of the project before anything changes, and list what the old driver does today: which buttons, which scenes, which rooms. Once it's set up, Chowmain says pairings survive driver updates, reboots and a project restored onto a replacement controller.
What it costs
The driver licence comes from its maker, at the prices above. The programming around it is priced per job: a routine that follows what's playing (the room dims when the film starts, comes back up on pause) is $199, and a change to a button or scene that already exists is $49. Remote Control4 programming, with prices has the whole list. The free controller checker tells you which OS your controller runs today and whether it can reach 4.0. To talk it through, text (734) 231-1940 or email support@ixome.ai and we answer in writing.
Sources
- Control4: Apple TV Driver quick start guide (DOC-00449-C, 2021-04-13)
- Chowmain: Apple TV driver for Control4 and its installation and usage guide (version 20261029), and its announcement on r/Control4 (October 26, 2026)
- DTI Automation: Apple TV on DriverCentral
- Intrinsic Dev: Apple TV 4K driver for Control4
