[{"data":1,"prerenderedAt":14},["ShallowReactive",2],{"$f28e6af871vo26":3},{"title":4,"excerpt":5,"readTime":6,"author":7,"updated_at":8,"created_at":9,"body":10,"id":11,"thumbnail":12,"body_html":13},"Control4 Remote Not Working? Halo and SR-260 Fixes","Blank screen, restarts, chimes on the dock, slow to wake: what to check on a Control4 Halo, Halo Touch or SR-260 remote, from Snap One's own guides.","7 min read","Ixome","2026-11-03T00:37:22+00:00","2026-10-30T21:55:11+00:00","\u003Cp>When a Control4 remote stops working, the fix depends on which remote it is and what it is doing. A blank screen, a remote that restarts when a button is pressed, one that chimes again and again on its dock, and one that ignores the first press are four different problems. This page sorts them out from Snap One's own guides, data sheets and firmware release notes.\u003C\u002Fp>\n\u003Cp>If \u003Cem>everything\u003C\u002Fem> stopped at once (the remote, the keypad scenes and the app), the remote is not the problem. Start with \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F64\">Control4 not responding? Find which part stopped\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Ch2>First: which remote is it?\u003C\u002Fh2>\n\u003Cul>\n\u003Cli>\u003Cstrong>Halo\u003C\u002Fstrong> (C4-HALO-BL): a 2.8-inch color screen with buttons. Rechargeable, it sits on a docking station, and it connects over Wi-Fi.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Halo Touch\u003C\u002Fstrong> (C4-HALO-TS-BL or -AS): a 3.2-inch touchscreen plus backlit buttons. Also rechargeable on a dock, also Wi-Fi.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>SR-260\u003C\u002Fstrong> (C4-SR260, and the SR-260-I with icon buttons): 50 buttons and a small screen with text menus at the top. It runs on four AA batteries, or an optional rechargeable battery and recharging station, and it talks to the controller over Zigbee, a low-power wireless mesh network.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>That difference matters: a Halo depends on the home's Wi-Fi, and an SR-260 does not. Both Halo models need Control4 OS 3.3.2 or later.\u003C\u002Fp>\n\n\u003Ch2>The screen is blank or dark\u003C\u002Fh2>\n\u003Ch3>SR-260\u003C\u002Fh3>\n\u003Col>\n\u003Cli>\u003Cstrong>Check the brightness.\u003C\u002Fstrong> Press LIST, then Settings, then Config. Display Brightness and Keypad Brightness set how bright the screen and buttons are, and Light Sensor lets the remote dim itself to the room. A screen turned right down is easy to mistake for a dead one.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Check the batteries.\u003C\u002Fstrong> Battery Level is on the same Config menu. Control4's guide calls for four AA \u003Cem>alkaline\u003C\u002Fem> batteries: rechargeable AAs are not supported and can make the battery gauge read wrong. Don't mix old and new, and after taking the old ones out, wait 20 seconds before putting the new ones in.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>The top line is lit, but the menu is empty.\u003C\u002Fstrong> If the remote's own status line and battery icon show but nothing appears below them, the remote has power and usually isn't getting its menus from the controller. \u003Ca href=\"https:\u002F\u002Fwww.reddit.com\u002Fr\u002FControl4\u002Fcomments\u002F1xh9qzz\u002Fhelp_with_remote\u002F\" rel=\"nofollow noopener\" target=\"_blank\">An owner on r\u002FControl4\u003C\u002Fa> described exactly this in October 2026: restarting the remote about four times changed nothing, and unplugging the whole rack and plugging it back in brought it back. A reply in that thread put it this way: the remote is on the Zigbee network but not reaching the controller, so restart the main controller. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F64\">Here is how to find it and restart it\u003C\u002Fa>.\u003C\u002Fli>\n\u003C\u002Fol>\n\u003Ch3>Halo and Halo Touch\u003C\u002Fh3>\n\u003Col>\n\u003Cli>\u003Cstrong>Charge it.\u003C\u002Fstrong> Put it on its dock, powered by the USB-C supply that came in the box.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Press twice.\u003C\u002Fstrong> Every Halo release note since April 2024 lists the same known issue: when the remote wakes from deep sleep, the button press that woke it is not sent to the system. Press again. It is a known limitation, not a broken remote.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Turn it off and on.\u003C\u002Fstrong> Snap One's button guides say a quick press of Power turns the room off, and pressing and holding it powers the remote off or on. Hold it to power off, then hold it again until the screen comes back on.\u003C\u002Fli>\n\u003C\u002Fol>\n\n\u003Ch2>The Halo keeps losing connection\u003C\u002Fh2>\n\u003Cp>Snap One's own Halo troubleshooting comes down to the network:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>\u003Cstrong>A fixed address for the controller.\u003C\u002Fstrong> Snap One's first instruction for \"losing control\" is a DHCP reservation for the main Control4 controller and the devices that talk to it, so their addresses never change. If the router was replaced or reset, start here: \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F1\">Control4 not working after a new router or mesh Wi-Fi\u003C\u002Fa>.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Signal where the remote is used.\u003C\u002Fstrong> The Halo driver shows the remote's signal strength (RSSI). Snap One's target is −70 dBm or better. Below −75 dBm, it says, the remote's connection to the system is impaired.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Access point settings.\u003C\u002Fstrong> For 2.4 GHz, Snap One recommends channel 1, 6 or 11, set as a fixed channel, and Multicast Enhancement turned off. If connections are still unreliable it says to simplify the network: turn off DFS channels, channel fly, band steering and roaming, and if needed give the remote its own 2.4 GHz network.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>One setup trap.\u003C\u002Fstrong> The QR-code setup does not work on a home network that uses the 192.168.89.x range. Snap One still lists this as a known issue in its October 2026 release.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>The signal reading is in the remote's driver in Composer. OvrC, Snap One's remote management service, also reports each Halo's battery and Wi-Fi data to whoever looks after the system.\u003C\u002Fp>\n\n\u003Ch2>The Halo battery runs down fast\u003C\u002Fh2>\n\u003Cp>Snap One names one cause first: \u003Cstrong>Multicast Enhancement\u003C\u002Fstrong> on the Wi-Fi access points. The feature converts multicast traffic to unicast, which keeps the access point talking to the remote constantly, so the remote never goes to sleep and drains its battery. Snap One's fix is to turn it off in the access points. Heat matters too: the data sheets give an operating range of 32 to 95 °F and say to avoid direct sunlight.\u003C\u002Fp>\n\n\u003Ch2>A Halo Touch restarts when the Off button is pressed\u003C\u002Fh2>\n\u003Cp>Snap One has fixed restarts like this more than once. Firmware 2.3.1 (August 2025) lists a fix for \"multiple presses on the physical Power off button causes the remote to restart.\" Firmware 2.6.1, released October 28, 2026, fixes \"a rare unexpected reboot on Halo Touch\" and \"a rare startup crash on Halo Touch.\" So before anything else, get the remote onto current firmware:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>Halo remotes update themselves over the air and check for updates between 2 and 6 AM. Leave the remote on its dock overnight: an update needs the charger or at least 20% battery, and can take up to 30 minutes.\u003C\u002Fli>\n\u003Cli>Since firmware 2.1.5 (April 2025), updates arrive in staged rollouts. Snap One said then that some remotes see an update the morning after release and all of them within three days.\u003C\u002Fli>\n\u003Cli>Anyone with Composer access to the project can force it: System Design, select the Halo driver, then Actions, and start the firmware update.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>If it still restarts on 2.6.1, that is a fault to report to Snap One through whoever looks after the system, with the remote's logs.\u003C\u002Fp>\n\n\u003Ch2>A Halo chimes on its dock again and again\u003C\u002Fh2>\n\u003Cp>The chime is the docking tone, the sound the remote makes when it is set on its dock. Snap One's notes don't describe a remote that chimes again and again while it sits there. What they do say:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>Since firmware 2.5.3 (July 2026) the docking tone has its own setting on the remote: Settings, Docking Tone, low, medium or high.\u003C\u002Fli>\n\u003Cli>Firmware 2.6.1 fixed the docking-tone setting being reset after an update, and a delay in the charging icon and sound after docking.\u003C\u002Fli>\n\u003Cli>Use the dock and USB-C power supply that came with the remote, and seat the remote fully. If it carries on with current firmware, the dock or the remote is a question for Snap One support.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>Resetting a remote: the last step, not the first\u003C\u002Fh2>\n\u003Ch3>Halo and Halo Touch\u003C\u002Fh3>\n\u003Cp>Snap One documents two ways to take a Halo back to its first-time setup screen, the one with the QR code:\u003C\u002Fp>\n\u003Col>\n\u003Cli>\u003Cstrong>From the project\u003C\u002Fstrong>, while the remote is still online: delete the Halo driver in Composer. Within one to two minutes the remote shows its setup QR code.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>On the remote:\u003C\u002Fstrong> power it off. With the screen still off, press and hold Back, and keep holding it. Press and hold Power until the screen comes on, then let go of Power. When the QR code appears, let go of Back.\u003C\u002Fli>\n\u003C\u002Fol>\n\u003Cp>An owner can add it back. In the Control4 app, open Settings, choose the system's name, then Add Halo Remote, and scan the QR code on the remote. It can also be added without the app: choose \"Add without C4 app\" on the remote's setup screen and enter the Wi-Fi details with the directional pad.\u003C\u002Fp>\n\u003Ch3>SR-260\u003C\u002Fh3>\n\u003Cp>The SR-260 has a Factory Defaults item on its Config menu. Control4's user guide describes it as returning the remote's preferences to their defaults; the installation guide says it resets the remote to its factory defaults. Neither says whether it takes the remote off the system. A button-sequence factory reset does: \u003Ca href=\"https:\u002F\u002Fwww.c4forums.com\u002Ftopic\u002F21197-help-sr260-remote-frozen-in-reset-mode\u002F\" rel=\"nofollow noopener\" target=\"_blank\">on c4forums, a Control4 employee explains\u003C\u002Fa> that after one, the remote is no longer on the system's Zigbee mesh and has to be added back. An SR-260 is added and identified in Composer Pro, which Control4 licenses only to dealers, so a remote that has left the system needs someone with Composer Pro. That can be done remotely, with someone at the house holding the remote for the identify step. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F49\">What a remote Control4 programmer can and can't do\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Ch2>When it really is the remote\u003C\u002Fh2>\n\u003Cp>If the remote is the only thing failing, it has fresh batteries or a full charge, the controller has been restarted and it still won't work, the remote itself may have failed. The SR-260 carries Control4's limited two-year warranty. To compare replacements, \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F63\">a simple, Apple TV-style remote for Control4\u003C\u002Fa> covers Halo, Halo Touch, the SR-260 and the other options.\u003C\u002Fp>\n\u003Cp>To have the remote's driver, signal and firmware checked remotely, text (734) 231-1940 or email support@ixome.ai and we answer in writing.\u003C\u002Fp>\n\n\u003Ch2>Sources\u003C\u002Fh2>\n\u003Cp>Snap One, \u003Ca href=\"https:\u002F\u002Fhelp.snapone.com\u002Fhalo-ig\u002FContent\u002FIntro.htm\" rel=\"noopener\" target=\"_blank\">Halo Remote Installation Guide\u003C\u002Fa>: Installing, Troubleshooting, Wi-Fi tips, Updating the firmware, Resetting the remote, and the firmware release notes for 1.8.3 through 2.6.1. Control4 button guides for the \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote\u002Fquick-reference\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote-touch\u002Fquick-reference\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo Touch\u003C\u002Fa>, and data sheets for the \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote\u002Fdata-sheet\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote-touch\u002Fdata-sheet\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo Touch\u003C\u002Fa>. Control4 \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fsystem-remote-control-sr-260\u002Fuser-guide\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">SR-260 User Guide\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fsystem-remote-control-sr-260\u002Fdealer-installation-and-setup-guide\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">SR-260 Installation and Setup Guide\u003C\u002Fa>.\u003C\u002Fp>",68,"\u002Fthumbnails\u002Farticle_68.webp","\u003Cp>When a Control4 remote stops working, the fix depends on which remote it is and what it is doing. A blank screen, a remote that restarts when a button is pressed, one that chimes again and again on its dock, and one that ignores the first press are four different problems. This page sorts them out from Snap One's own guides, data sheets and firmware release notes.\u003C\u002Fp>\n\u003Cp>If \u003Cem>everything\u003C\u002Fem> stopped at once (the remote, the keypad scenes and the app), the remote is not the problem. Start with \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F64\">Control4 not responding? Find which part stopped\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Ch2>First: which remote is it?\u003C\u002Fh2>\n\u003Cul>\n\u003Cli>\u003Cstrong>Halo\u003C\u002Fstrong> (C4-HALO-BL): a 2.8-inch color screen with buttons. Rechargeable, it sits on a docking station, and it connects over Wi-Fi.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Halo Touch\u003C\u002Fstrong> (C4-HALO-TS-BL or -AS): a 3.2-inch touchscreen plus backlit buttons. Also rechargeable on a dock, also Wi-Fi.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>SR-260\u003C\u002Fstrong> (C4-SR260, and the SR-260-I with icon buttons): 50 buttons and a small screen with text menus at the top. It runs on four AA batteries, or an optional rechargeable battery and recharging station, and it talks to the controller over Zigbee, a low-power wireless mesh network.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>That difference matters: a Halo depends on the home's Wi-Fi, and an SR-260 does not. Both Halo models need Control4 OS 3.3.2 or later.\u003C\u002Fp>\n\n\u003Ch2>The screen is blank or dark\u003C\u002Fh2>\n\u003Ch3>SR-260\u003C\u002Fh3>\n\u003Col>\n\u003Cli>\u003Cstrong>Check the brightness.\u003C\u002Fstrong> Press LIST, then Settings, then Config. Display Brightness and Keypad Brightness set how bright the screen and buttons are, and Light Sensor lets the remote dim itself to the room. A screen turned right down is easy to mistake for a dead one.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Check the batteries.\u003C\u002Fstrong> Battery Level is on the same Config menu. Control4's guide calls for four AA \u003Cem>alkaline\u003C\u002Fem> batteries: rechargeable AAs are not supported and can make the battery gauge read wrong. Don't mix old and new, and after taking the old ones out, wait 20 seconds before putting the new ones in.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>The top line is lit, but the menu is empty.\u003C\u002Fstrong> If the remote's own status line and battery icon show but nothing appears below them, the remote has power and usually isn't getting its menus from the controller. \u003Ca href=\"https:\u002F\u002Fwww.reddit.com\u002Fr\u002FControl4\u002Fcomments\u002F1xh9qzz\u002Fhelp_with_remote\u002F\" rel=\"nofollow noopener\" target=\"_blank\">An owner on r\u002FControl4\u003C\u002Fa> described exactly this in October 2026: restarting the remote about four times changed nothing, and unplugging the whole rack and plugging it back in brought it back. A reply in that thread put it this way: the remote is on the Zigbee network but not reaching the controller, so restart the main controller. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F64\">Here is how to find it and restart it\u003C\u002Fa>.\u003C\u002Fli>\n\u003C\u002Fol>\n\u003Ch3>Halo and Halo Touch\u003C\u002Fh3>\n\u003Col>\n\u003Cli>\u003Cstrong>Charge it.\u003C\u002Fstrong> Put it on its dock, powered by the USB-C supply that came in the box.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Press twice.\u003C\u002Fstrong> Every Halo release note since April 2024 lists the same known issue: when the remote wakes from deep sleep, the button press that woke it is not sent to the system. Press again. It is a known limitation, not a broken remote.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Turn it off and on.\u003C\u002Fstrong> Snap One's button guides say a quick press of Power turns the room off, and pressing and holding it powers the remote off or on. Hold it to power off, then hold it again until the screen comes back on.\u003C\u002Fli>\n\u003C\u002Fol>\n\n\u003Ch2>The Halo keeps losing connection\u003C\u002Fh2>\n\u003Cp>Snap One's own Halo troubleshooting comes down to the network:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>\u003Cstrong>A fixed address for the controller.\u003C\u002Fstrong> Snap One's first instruction for \"losing control\" is a DHCP reservation for the main Control4 controller and the devices that talk to it, so their addresses never change. If the router was replaced or reset, start here: \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F1\">Control4 not working after a new router or mesh Wi-Fi\u003C\u002Fa>.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Signal where the remote is used.\u003C\u002Fstrong> The Halo driver shows the remote's signal strength (RSSI). Snap One's target is −70 dBm or better. Below −75 dBm, it says, the remote's connection to the system is impaired.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Access point settings.\u003C\u002Fstrong> For 2.4 GHz, Snap One recommends channel 1, 6 or 11, set as a fixed channel, and Multicast Enhancement turned off. If connections are still unreliable it says to simplify the network: turn off DFS channels, channel fly, band steering and roaming, and if needed give the remote its own 2.4 GHz network.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>One setup trap.\u003C\u002Fstrong> The QR-code setup does not work on a home network that uses the 192.168.89.x range. Snap One still lists this as a known issue in its October 2026 release.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>The signal reading is in the remote's driver in Composer. OvrC, Snap One's remote management service, also reports each Halo's battery and Wi-Fi data to whoever looks after the system.\u003C\u002Fp>\n\n\u003Ch2>The Halo battery runs down fast\u003C\u002Fh2>\n\u003Cp>Snap One names one cause first: \u003Cstrong>Multicast Enhancement\u003C\u002Fstrong> on the Wi-Fi access points. The feature converts multicast traffic to unicast, which keeps the access point talking to the remote constantly, so the remote never goes to sleep and drains its battery. Snap One's fix is to turn it off in the access points. Heat matters too: the data sheets give an operating range of 32 to 95 °F and say to avoid direct sunlight.\u003C\u002Fp>\n\n\u003Ch2>A Halo Touch restarts when the Off button is pressed\u003C\u002Fh2>\n\u003Cp>Snap One has fixed restarts like this more than once. Firmware 2.3.1 (August 2025) lists a fix for \"multiple presses on the physical Power off button causes the remote to restart.\" Firmware 2.6.1, released October 28, 2026, fixes \"a rare unexpected reboot on Halo Touch\" and \"a rare startup crash on Halo Touch.\" So before anything else, get the remote onto current firmware:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>Halo remotes update themselves over the air and check for updates between 2 and 6 AM. Leave the remote on its dock overnight: an update needs the charger or at least 20% battery, and can take up to 30 minutes.\u003C\u002Fli>\n\u003Cli>Since firmware 2.1.5 (April 2025), updates arrive in staged rollouts. Snap One said then that some remotes see an update the morning after release and all of them within three days.\u003C\u002Fli>\n\u003Cli>Anyone with Composer access to the project can force it: System Design, select the Halo driver, then Actions, and start the firmware update.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>If it still restarts on 2.6.1, that is a fault to report to Snap One through whoever looks after the system, with the remote's logs.\u003C\u002Fp>\n\n\u003Ch2>A Halo chimes on its dock again and again\u003C\u002Fh2>\n\u003Cp>The chime is the docking tone, the sound the remote makes when it is set on its dock. Snap One's notes don't describe a remote that chimes again and again while it sits there. What they do say:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>Since firmware 2.5.3 (July 2026) the docking tone has its own setting on the remote: Settings, Docking Tone, low, medium or high.\u003C\u002Fli>\n\u003Cli>Firmware 2.6.1 fixed the docking-tone setting being reset after an update, and a delay in the charging icon and sound after docking.\u003C\u002Fli>\n\u003Cli>Use the dock and USB-C power supply that came with the remote, and seat the remote fully. If it carries on with current firmware, the dock or the remote is a question for Snap One support.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>Resetting a remote: the last step, not the first\u003C\u002Fh2>\n\u003Ch3>Halo and Halo Touch\u003C\u002Fh3>\n\u003Cp>Snap One documents two ways to take a Halo back to its first-time setup screen, the one with the QR code:\u003C\u002Fp>\n\u003Col>\n\u003Cli>\u003Cstrong>From the project\u003C\u002Fstrong>, while the remote is still online: delete the Halo driver in Composer. Within one to two minutes the remote shows its setup QR code.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>On the remote:\u003C\u002Fstrong> power it off. With the screen still off, press and hold Back, and keep holding it. Press and hold Power until the screen comes on, then let go of Power. When the QR code appears, let go of Back.\u003C\u002Fli>\n\u003C\u002Fol>\n\u003Cp>An owner can add it back. In the Control4 app, open Settings, choose the system's name, then Add Halo Remote, and scan the QR code on the remote. It can also be added without the app: choose \"Add without C4 app\" on the remote's setup screen and enter the Wi-Fi details with the directional pad.\u003C\u002Fp>\n\u003Ch3>SR-260\u003C\u002Fh3>\n\u003Cp>The SR-260 has a Factory Defaults item on its Config menu. Control4's user guide describes it as returning the remote's preferences to their defaults; the installation guide says it resets the remote to its factory defaults. Neither says whether it takes the remote off the system. A button-sequence factory reset does: \u003Ca href=\"https:\u002F\u002Fwww.c4forums.com\u002Ftopic\u002F21197-help-sr260-remote-frozen-in-reset-mode\u002F\" rel=\"nofollow noopener\" target=\"_blank\">on c4forums, a Control4 employee explains\u003C\u002Fa> that after one, the remote is no longer on the system's Zigbee mesh and has to be added back. An SR-260 is added and identified in Composer Pro, which Control4 licenses only to dealers, so a remote that has left the system needs someone with Composer Pro. That can be done remotely, with someone at the house holding the remote for the identify step. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F49\">What a remote Control4 programmer can and can't do\u003C\u002Fa>.\u003C\u002Fp>\n\n\u003Ch2>When it really is the remote\u003C\u002Fh2>\n\u003Cp>If the remote is the only thing failing, it has fresh batteries or a full charge, the controller has been restarted and it still won't work, the remote itself may have failed. The SR-260 carries Control4's limited two-year warranty. To compare replacements, \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F63\">a simple, Apple TV-style remote for Control4\u003C\u002Fa> covers Halo, Halo Touch, the SR-260 and the other options.\u003C\u002Fp>\n\u003Cp>To have the remote's driver, signal and firmware checked remotely, text (734) 231-1940 or email support@ixome.ai and we answer in writing.\u003C\u002Fp>\n\n\u003Ch2>Sources\u003C\u002Fh2>\n\u003Cp>Snap One, \u003Ca href=\"https:\u002F\u002Fhelp.snapone.com\u002Fhalo-ig\u002FContent\u002FIntro.htm\" rel=\"noopener\" target=\"_blank\">Halo Remote Installation Guide\u003C\u002Fa>: Installing, Troubleshooting, Wi-Fi tips, Updating the firmware, Resetting the remote, and the firmware release notes for 1.8.3 through 2.6.1. Control4 button guides for the \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote\u002Fquick-reference\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote-touch\u002Fquick-reference\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo Touch\u003C\u002Fa>, and data sheets for the \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote\u002Fdata-sheet\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fhalo-remote-touch\u002Fdata-sheet\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">Halo Touch\u003C\u002Fa>. Control4 \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fsystem-remote-control-sr-260\u002Fuser-guide\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">SR-260 User Guide\u003C\u002Fa> and \u003Ca href=\"https:\u002F\u002Fwww.control4.com\u002Fdocs\u002Fproduct\u002Fsystem-remote-control-sr-260\u002Fdealer-installation-and-setup-guide\u002Fenglish\u002Flatest\" rel=\"noopener\" target=\"_blank\">SR-260 Installation and Setup Guide\u003C\u002Fa>.\u003C\u002Fp>\n\u003Caside class=\"article-related\">\u003Ch2>Related from Ixome\u003C\u002Fh2>\u003Cul>\u003Cli>\u003Ca href=\"\u002Fprogram-control4-yourself\">Can you program it yourself? Composer Home vs Pro, explained honestly\u003C\u002Fa>\u003C\u002Fli>\u003Cli>\u003Ca href=\"\u002Fcontrol4-os-upgrade-checker\">Free check: which OS can your Control4 controller actually get?\u003C\u002Fa>\u003C\u002Fli>\u003Cli>\u003Ca href=\"\u002Fregister-used-control4-controller\">Bought a used Control4 controller? We register and update it\u003C\u002Fa>\u003C\u002Fli>\u003C\u002Ful>\u003C\u002Faside>",1795311204776]