[{"data":1,"prerenderedAt":14},["ShallowReactive",2],{"$f3n34ngfaqz5sf":3},{"title":4,"excerpt":5,"readTime":6,"author":7,"updated_at":8,"created_at":9,"body":10,"id":11,"thumbnail":12,"body_html":13},"Control4 Zigbee 3.0 in X4.3: Hue Without a Bridge, and More","Control4 X4.3 lets a CORE controller join other brands' Zigbee 3.0 devices with no hub: Hue lights, Kwikset and Yale locks. What you need, what you give up.","5 min read","Ixome","2026-11-19T23:45:31+00:00","2026-10-29T13:50:37+00:00","\u003Cp>Until October 2026, the honest answer to \"can Control4 run Philips Hue bulbs, or another brand's Zigbee lock or sensor, without a hub?\" was no: you added the maker's bridge and a driver that talked to the bridge. Control4 OS X4.3 (version 4.3.0, released October 21, 2026) changes that for one group of systems. A Control4 controller can now take certified Zigbee 3.0 devices from other makers straight onto its own Zigbee 3.0 network, with no bridge in between, as long as three things are true:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>the controller is a \u003Cstrong>CORE-series\u003C\u002Fstrong> model,\u003C\u002Fli>\n\u003Cli>the system runs \u003Cstrong>OS 4.3.0 or later\u003C\u002Fstrong>, and\u003C\u002Fli>\n\u003Cli>there is a \u003Cstrong>Control4 driver\u003C\u002Fstrong> for the device.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>Older forum threads that say \"you need a Hue bridge\" were right when they were written. Here is what changed, what you need, and what you give up.\u003C\u002Fp>\n\n\u003Ch2>What Control4 shipped, and when\u003C\u002Fh2>\n\u003Cp>\u003Cstrong>X4.2 (April 16, 2026)\u003C\u002Fstrong> moved CORE controllers onto standard Zigbee 3.0. Control4's release notes: \"With OS 4.2, the Control4 Zigbee mesh transitions from a proprietary implementation to a standards based Zigbee 3.0 mesh,\" and Control4's LUX lighting moves to it automatically during the update. Third-party devices still needed a driver, and few existed.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>X4.3 (October 21, 2026)\u003C\u002Fstrong> adds what Control4 calls \"full third-party Zigbee 3.0 device support.\" From the \u003Ca href=\"https:\u002F\u002Fhelp.snapone.com\u002Fc4-osreleasenotes\u002FContent\u002FOS%204.3\u002F1%20Introduction.htm\" rel=\"noopener\" target=\"_blank\">X4.3 release notes\u003C\u002Fa>:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>The first devices with Control4's own drivers are \u003Cstrong>Kwikset Zigbee 3.0 locks\u003C\u002Fstrong> (Home Connect 620, 914 and 916) and \u003Cstrong>Yale Zigbee 3.0 locks\u003C\u002Fstrong> in the Assure Lock 2 family: lock and unlock, lock status, key and thumb-turn events, user codes and battery level.\u003C\u002Fli>\n\u003Cli>Somfy Zigbee 3.0 shades and curtains are \"in development.\"\u003C\u002Fli>\n\u003Cli>Devices can pair by scanning their installation code (a QR code) as well as the standard way.\u003C\u002Fli>\n\u003Cli>Their firmware can be updated over the air from the controller, without waiting for a Control4 update.\u003C\u002Fli>\n\u003Cli>A developer kit that lets any Zigbee 3.0 maker build its own integration is \"planned for 2027.\"\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>What your system needs\u003C\u002Fh2>\n\u003Cp>\u003Cstrong>A CORE-series controller.\u003C\u002Fstrong> Control4's notes say the Zigbee 3.0 network is \"formed on a Core-series controller.\" Chowmain's Hue driver guide is specific: the EA series, HC series, CA-1 and CA-10 are not supported. An EA-1, EA-3 or EA-5 still runs X4 and still gets updates. It just can't host this network. The label on the controller tells you which one you have; \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F34\">this page lists every model\u003C\u002Fa>.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>OS 4.3.0 or later.\u003C\u002Fstrong> Control4's upgrade path for 4.3 starts at OS 4.0 or higher. A system on OS 3 goes to 3.4.3 first, then 4.0.0, then up. Our own climb goes to 4.3.0, stepping through 4.2.1 on the way. Each stage carries the project forward, and skipping stages is how bindings break. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F25\">What an upgrade gives you, and what it costs\u003C\u002Fa> covers the trade-offs, including the on-screen display that EA controllers lose on X4.1 and later.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>A driver for each device.\u003C\u002Fstrong> Joining the network is not the same as being controllable. Each device needs a driver that knows it, and drivers are added in Composer Pro, the dealer software. A homeowner can't add one from the app or from Composer HE. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F35\">What owners can change themselves\u003C\u002Fa> explains the line.\u003C\u002Fp>\n\n\u003Ch2>Your existing Control4 devices keep working\u003C\u002Fh2>\n\u003Cp>The new network runs alongside the old one. In Control4's words: \"Zigbee 3.0 and legacy Control4 Zigbee Pro meshes run side by side, so existing legacy devices keep working exactly as they do today.\" Older Control4 devices cannot join the new network: Gen1, Gen2 and Gen3 lighting, the Control4 thermostat, the SR-260 remote, Essential V1, and Z2C\u002FZ2IO V1. They stay fully supported on the old network. Separately, Control4 has said X4 is the last OS for Gen1 and Gen2 dimmers, switches and keypads and for T3 touch screens.\u003C\u002Fp>\n\n\u003Ch2>Philips Hue without the bridge\u003C\u002Fh2>\n\u003Cp>Chowmain has announced bridgeless Zigbee 3.0 support in its \u003Ca href=\"https:\u002F\u002Fchowmain.software\u002Fdrivers\u002Fcontrol4-phillips-hue\" rel=\"noopener\" target=\"_blank\">Philips Hue driver for Control4\u003C\u002Fa>. From Chowmain's own guide:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>\u003Cstrong>What joins:\u003C\u002Fstrong> Hue lights, lightstrips and the Hue Smart Plug that support Zigbee 3.0 (most Hue products released since 2018), the Dimmer Switch (V2), Tap Dial Switch, Smart Button, Wall Switch Module, Motion Sensor (2nd generation), Outdoor Motion Sensor and Secure Contact Sensor.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>What doesn't:\u003C\u002Fstrong> battery-free switches (the Hue Tap and Friends of Hue switches), Hue sirens, chimes, cameras, doorbells and the Sync Box. Pre-2018 products such as the original Dimmer Switch and the first-generation Motion Sensor may not join.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>What you give up:\u003C\u002Fstrong> Hue rooms, zones, scenes, smart scenes and MotionAware. Control4's own scenes and programming take their place. Devices on the Control4 network also stop getting Hue firmware updates, so Chowmain says to install any pending updates in the Hue app before moving a device over.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>One network per device.\u003C\u002Fstrong> Each Hue device sits either on a Hue Bridge or on the Control4 network, never both. Both kinds can be in the same project.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>The bridge route hasn't gone away. Chowmain's bridge drivers still work from OS 3.4.3, need a Hue Bridge V2 or Bridge Pro, and keep everything in the list above. That includes EA controllers, but not the HC series. If what you like about Hue is its scenes, MotionAware or the battery-free switches, the bridge is still the better fit. If you would rather have one fewer box and keep everything in Control4's own scenes, the bridgeless drivers do that. Chowmain licenses its drivers through its own Project Agent, and its drivers come with a 90-day trial.\u003C\u002Fp>\n\n\u003Ch2>Other brands\u003C\u002Fh2>\n\u003Cp>Finite Labs released a \"Universal Zigbee 3.0 (Beta)\" driver on \u003Ca href=\"https:\u002F\u002Fdrivercentral.io\u002Fplatforms\u002Fcontrol4-drivers\u002Futility\u002Fzigbee3\" rel=\"noopener\" target=\"_blank\">DriverCentral\u003C\u002Fa> on October 29, 2026, and updated it on November 11 and 12. It brings in lights, switches, plugs, sensors, remotes and locks from many makers, and since November 11 shades and blinds too, on OS 4.3 or later. Its listing is candid about being a beta. It says it is \"under active development\" and some devices may not yet work reliably. First-generation Xiaomi and Aqara battery sensors don't pair. Since November 11, a lock's user codes can be added, changed, disabled and deleted in Navigator, with schedules where the lock takes them. Fans run as on\u002Foff only. On OS 4.3, the controller can take hours after pairing to finish setting up a battery device, so a button press or a reading can be missed until then. That is a reasonable place to experiment, not where we would start a lock on a front door.\u003C\u002Fp>\n\n\u003Ch2>Practical notes before anyone pairs anything\u003C\u002Fh2>\n\u003Cul>\n\u003Cli>\u003Cstrong>Back up the project first,\u003C\u002Fstrong> and check the backup against the live system, before any OS update. The climb to 4.3 is an OS update like any other.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Pair close to the controller, mains-powered lights first.\u003C\u002Fstrong> Chowmain's guide says to pair lights first so battery devices further away have something to reach.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Battery devices take settings only while awake.\u003C\u002Fstrong> After changing a setting, press a button or trigger the sensor so it picks the change up.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>Where does your system stand?\u003C\u002Fh2>\n\u003Cp>The first question is the controller model and the OS it runs today. Our \u003Ca href=\"\u002Fcontrol4-os-upgrade-checker\">free controller checker\u003C\u002Fa> reads both and tells you what is possible remotely, with prices. If your controller is an EA and the new network is the reason you're looking at a CORE, \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F13\">a controller replacement carries your programming over\u003C\u002Fa>. To talk it through, text (734) 231-1940 or email support@ixome.ai and we answer in writing.\u003C\u002Fp>",65,"\u002Fthumbnails\u002Farticle_65.webp","\u003Cp>Until October 2026, the honest answer to \"can Control4 run Philips Hue bulbs, or another brand's Zigbee lock or sensor, without a hub?\" was no: you added the maker's bridge and a driver that talked to the bridge. Control4 OS X4.3 (version 4.3.0, released October 21, 2026) changes that for one group of systems. A Control4 controller can now take certified Zigbee 3.0 devices from other makers straight onto its own Zigbee 3.0 network, with no bridge in between, as long as three things are true:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>the controller is a \u003Cstrong>CORE-series\u003C\u002Fstrong> model,\u003C\u002Fli>\n\u003Cli>the system runs \u003Cstrong>OS 4.3.0 or later\u003C\u002Fstrong>, and\u003C\u002Fli>\n\u003Cli>there is a \u003Cstrong>Control4 driver\u003C\u002Fstrong> for the device.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>Older forum threads that say \"you need a Hue bridge\" were right when they were written. Here is what changed, what you need, and what you give up.\u003C\u002Fp>\n\n\u003Ch2>What Control4 shipped, and when\u003C\u002Fh2>\n\u003Cp>\u003Cstrong>X4.2 (April 16, 2026)\u003C\u002Fstrong> moved CORE controllers onto standard Zigbee 3.0. Control4's release notes: \"With OS 4.2, the Control4 Zigbee mesh transitions from a proprietary implementation to a standards based Zigbee 3.0 mesh,\" and Control4's LUX lighting moves to it automatically during the update. Third-party devices still needed a driver, and few existed.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>X4.3 (October 21, 2026)\u003C\u002Fstrong> adds what Control4 calls \"full third-party Zigbee 3.0 device support.\" From the \u003Ca href=\"https:\u002F\u002Fhelp.snapone.com\u002Fc4-osreleasenotes\u002FContent\u002FOS%204.3\u002F1%20Introduction.htm\" rel=\"noopener\" target=\"_blank\">X4.3 release notes\u003C\u002Fa>:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>The first devices with Control4's own drivers are \u003Cstrong>Kwikset Zigbee 3.0 locks\u003C\u002Fstrong> (Home Connect 620, 914 and 916) and \u003Cstrong>Yale Zigbee 3.0 locks\u003C\u002Fstrong> in the Assure Lock 2 family: lock and unlock, lock status, key and thumb-turn events, user codes and battery level.\u003C\u002Fli>\n\u003Cli>Somfy Zigbee 3.0 shades and curtains are \"in development.\"\u003C\u002Fli>\n\u003Cli>Devices can pair by scanning their installation code (a QR code) as well as the standard way.\u003C\u002Fli>\n\u003Cli>Their firmware can be updated over the air from the controller, without waiting for a Control4 update.\u003C\u002Fli>\n\u003Cli>A developer kit that lets any Zigbee 3.0 maker build its own integration is \"planned for 2027.\"\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>What your system needs\u003C\u002Fh2>\n\u003Cp>\u003Cstrong>A CORE-series controller.\u003C\u002Fstrong> Control4's notes say the Zigbee 3.0 network is \"formed on a Core-series controller.\" Chowmain's Hue driver guide is specific: the EA series, HC series, CA-1 and CA-10 are not supported. An EA-1, EA-3 or EA-5 still runs X4 and still gets updates. It just can't host this network. The label on the controller tells you which one you have; \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F34\">this page lists every model\u003C\u002Fa>.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>OS 4.3.0 or later.\u003C\u002Fstrong> Control4's upgrade path for 4.3 starts at OS 4.0 or higher. A system on OS 3 goes to 3.4.3 first, then 4.0.0, then up. Our own climb goes to 4.3.0, stepping through 4.2.1 on the way. Each stage carries the project forward, and skipping stages is how bindings break. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F25\">What an upgrade gives you, and what it costs\u003C\u002Fa> covers the trade-offs, including the on-screen display that EA controllers lose on X4.1 and later.\u003C\u002Fp>\n\u003Cp>\u003Cstrong>A driver for each device.\u003C\u002Fstrong> Joining the network is not the same as being controllable. Each device needs a driver that knows it, and drivers are added in Composer Pro, the dealer software. A homeowner can't add one from the app or from Composer HE. \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F35\">What owners can change themselves\u003C\u002Fa> explains the line.\u003C\u002Fp>\n\n\u003Ch2>Your existing Control4 devices keep working\u003C\u002Fh2>\n\u003Cp>The new network runs alongside the old one. In Control4's words: \"Zigbee 3.0 and legacy Control4 Zigbee Pro meshes run side by side, so existing legacy devices keep working exactly as they do today.\" Older Control4 devices cannot join the new network: Gen1, Gen2 and Gen3 lighting, the Control4 thermostat, the SR-260 remote, Essential V1, and Z2C\u002FZ2IO V1. They stay fully supported on the old network. Separately, Control4 has said X4 is the last OS for Gen1 and Gen2 dimmers, switches and keypads and for T3 touch screens.\u003C\u002Fp>\n\n\u003Ch2>Philips Hue without the bridge\u003C\u002Fh2>\n\u003Cp>Chowmain has announced bridgeless Zigbee 3.0 support in its \u003Ca href=\"https:\u002F\u002Fchowmain.software\u002Fdrivers\u002Fcontrol4-phillips-hue\" rel=\"noopener\" target=\"_blank\">Philips Hue driver for Control4\u003C\u002Fa>. From Chowmain's own guide:\u003C\u002Fp>\n\u003Cul>\n\u003Cli>\u003Cstrong>What joins:\u003C\u002Fstrong> Hue lights, lightstrips and the Hue Smart Plug that support Zigbee 3.0 (most Hue products released since 2018), the Dimmer Switch (V2), Tap Dial Switch, Smart Button, Wall Switch Module, Motion Sensor (2nd generation), Outdoor Motion Sensor and Secure Contact Sensor.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>What doesn't:\u003C\u002Fstrong> battery-free switches (the Hue Tap and Friends of Hue switches), Hue sirens, chimes, cameras, doorbells and the Sync Box. Pre-2018 products such as the original Dimmer Switch and the first-generation Motion Sensor may not join.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>What you give up:\u003C\u002Fstrong> Hue rooms, zones, scenes, smart scenes and MotionAware. Control4's own scenes and programming take their place. Devices on the Control4 network also stop getting Hue firmware updates, so Chowmain says to install any pending updates in the Hue app before moving a device over.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>One network per device.\u003C\u002Fstrong> Each Hue device sits either on a Hue Bridge or on the Control4 network, never both. Both kinds can be in the same project.\u003C\u002Fli>\n\u003C\u002Ful>\n\u003Cp>The bridge route hasn't gone away. Chowmain's bridge drivers still work from OS 3.4.3, need a Hue Bridge V2 or Bridge Pro, and keep everything in the list above. That includes EA controllers, but not the HC series. If what you like about Hue is its scenes, MotionAware or the battery-free switches, the bridge is still the better fit. If you would rather have one fewer box and keep everything in Control4's own scenes, the bridgeless drivers do that. Chowmain licenses its drivers through its own Project Agent, and its drivers come with a 90-day trial.\u003C\u002Fp>\n\n\u003Ch2>Other brands\u003C\u002Fh2>\n\u003Cp>Finite Labs released a \"Universal Zigbee 3.0 (Beta)\" driver on \u003Ca href=\"https:\u002F\u002Fdrivercentral.io\u002Fplatforms\u002Fcontrol4-drivers\u002Futility\u002Fzigbee3\" rel=\"noopener\" target=\"_blank\">DriverCentral\u003C\u002Fa> on October 29, 2026, and updated it on November 11 and 12. It brings in lights, switches, plugs, sensors, remotes and locks from many makers, and since November 11 shades and blinds too, on OS 4.3 or later. Its listing is candid about being a beta. It says it is \"under active development\" and some devices may not yet work reliably. First-generation Xiaomi and Aqara battery sensors don't pair. Since November 11, a lock's user codes can be added, changed, disabled and deleted in Navigator, with schedules where the lock takes them. Fans run as on\u002Foff only. On OS 4.3, the controller can take hours after pairing to finish setting up a battery device, so a button press or a reading can be missed until then. That is a reasonable place to experiment, not where we would start a lock on a front door.\u003C\u002Fp>\n\n\u003Ch2>Practical notes before anyone pairs anything\u003C\u002Fh2>\n\u003Cul>\n\u003Cli>\u003Cstrong>Back up the project first,\u003C\u002Fstrong> and check the backup against the live system, before any OS update. The climb to 4.3 is an OS update like any other.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Pair close to the controller, mains-powered lights first.\u003C\u002Fstrong> Chowmain's guide says to pair lights first so battery devices further away have something to reach.\u003C\u002Fli>\n\u003Cli>\u003Cstrong>Battery devices take settings only while awake.\u003C\u002Fstrong> After changing a setting, press a button or trigger the sensor so it picks the change up.\u003C\u002Fli>\n\u003C\u002Ful>\n\n\u003Ch2>Where does your system stand?\u003C\u002Fh2>\n\u003Cp>The first question is the controller model and the OS it runs today. Our \u003Ca href=\"\u002Fcontrol4-os-upgrade-checker\">free controller checker\u003C\u002Fa> reads both and tells you what is possible remotely, with prices. If your controller is an EA and the new network is the reason you're looking at a CORE, \u003Ca href=\"\u002Fcommunity\u002Farticle\u002F13\">a controller replacement carries your programming over\u003C\u002Fa>. To talk it through, text (734) 231-1940 or email support@ixome.ai and we answer in writing.\u003C\u002Fp>\n\u003Caside class=\"article-related\">\u003Ch2>Related from Ixome\u003C\u002Fh2>\u003Cul>\u003Cli>\u003Ca href=\"\u002Fprogram-control4-yourself\">Can you program it yourself? Composer Home vs Pro, explained honestly\u003C\u002Fa>\u003C\u002Fli>\u003Cli>\u003Ca href=\"\u002Fcontrol4-os-upgrade-checker\">Free check: which OS can your Control4 controller actually get?\u003C\u002Fa>\u003C\u002Fli>\u003Cli>\u003Ca href=\"\u002Fregister-used-control4-controller\">Bought a used Control4 controller? We register and update it\u003C\u002Fa>\u003C\u002Fli>\u003C\u002Ful>\u003C\u002Faside>",1795311204754]